hot metal

After adding the slag conglomeration agent, the slag binded hot metal loss is reduced averagely from 6.18kg/t hot metal to below 1kg/ t, meanwhile the slag removal time is shortened beyond one third.

加入聚渣剂后脱后铁渣铁损平均由吨铁6.18kg降至1kg以下，同时节约扒渣时间1/3以上。

The thermodynamic study of hot metal dephosphorization fluxes containing BOF slag

转炉渣用于铁水预处理脱磷剂的热力学分析

Development in technology of continuously measuring temperature of hot metal in tundish using tung sten-rhenium thermal couple

钨铼热电偶在连铸中间包钢水连续测温中的应用中间包钢水连续测温技术及钨铼热电偶主要相关技术的发展

Temperature, FeO, MgO, and MnO contents in slag, basicity of slag and thickness of slag layer are important factors, which affect silicon oxidation of hot metal in the hearth.

温度、炉渣中FeO，MgO，MnO含量、炉渣碱度、渣层厚度是影响（Si）氧化的重要因素。

Si content in hot metal was lower, kO was higher.

铁水硅含量越低，kO越大。

...a particle of hot metal...

热金属微粒

Based on thermodynamic function of hot metal predesulphurizing reaction and desulphurizing reaction rate, the conditions beneficial to hot metal predesulphurization was analyzed.

根据铁水预脱硫反应的热力学函数和脱硫反应速率，分析了有利于铁水预脱硫的条件。

The paper describes the functions of secondary refining ( including hot metal treatment) and puts forward some related proposals based on the future development of continuous casting for production of quality sheet steel, tin plate and silicon sheet steel in Shanghai iron and steel industry.

本文针对上海钢铁工业今后发展优质薄板、镀锡板和硅钢片钢的连铸生产，论述了炉外精炼技术所起的作用，并提出了有关建议。

DEVELOPMENT IN TECHNOLOGY OF CONTINUOUSLY MEASURING TEMPERATURE OF HOT METAL IN TUNDISH USING TUNG STEN-RHENIUM THERMAL COUPLE Application Research of Nonmetal Thermoelectric Couple in High Temperature Detection

中间包钢水连续测温技术及钨铼热电偶主要相关技术的发展非金属热电偶在高温探测中的应用研究

Analysis of hot metal temperature drop in torpedo car

鱼雷罐铁水温降分析

Neural Network Predicting Model for Hot Metal Desulphurization by Mg Containing Desulphurizer

镁基脱硫的人工神经网络预测模型

Influence on the melting process at shaft furnace with hot metal charging

部分热装铁水对竖式电炉冶炼工艺的影响

The hot metal is charged into BOF with some slag increasing production cycle time and cost increment.

对炼钢来说，入炉的铁水渣量大，使得冶炼周期长、消耗高。

Baosteel hot metal monitoring and management system is depicted including composition, main functions and their realization.

叙述宝钢铁水监控及管理系统的组成、主要功能及实现。

The structure optimization is ultimate approach to decreasing are and hot metal to steel ratio and energy consumption per ton crude steel.

钢铁工业结构优化是降低钢比系数，进而降低吨钢能耗的根本途径。

In this paper, the characteristics of TBM combined blowing technology in steelmaking plant of Meis-han has been introduced. And the influence of operation in medium phosphorous hot metal, metal charge consumption, converter lining after using this technology.

介绍TBM顶底复吹技术特征，在梅山炼钢厂应用时，以及运用该技术对冶炼中磷铁水操作、钢铁料消耗及炉衬的影响，通过使用TBM技术有效的改善了梅山的脱磷。

Application Study in Deoxidization and Alloying of Hot Metal by Adding Aluminium-manganese-titanium Alloy

用铝锰钛合金进行脱氧合金化的应用研究

Theoretical analysis to reduce temperature drop of hot metal in transportation

减少铁水和钢水出炉后温降的理论分析

Application of External Treatment Technology for Hot Metal in WISCO

炉外处理技术在武钢的应用

The process of steelmaking with hot metal containing low silicon in Steel-making Plant was introduced.

简介了川威炼钢厂低硅铁水冶炼工艺.

Using K-Na modification for hot metal during smelting resulted in better thermal impact resistance and thermal fatigue resistance.

在熔炼过程中，铁水采用K－Na变质剂处理，可获得良好的耐热冲击和耐热疲劳性能。

Study on the Optimization of Hot Metal Desulphurization by Mg-injection Process Through Water Model Experiment

铁水喷镁脱硫工艺优化水模实验研究

Experiment had proved feasible that two different metal ceramic rods used as thermal couple electrodes were immersed directly into hot metal to measure temperature continuously.

采用两种不同组成的金属陶瓷棒作为测温热电偶，置于钢液中进行连续测温，实验证明是可行的。

Prediction of Tapping Temperature of Hot Metal in Converter

转炉钢水出钢温度的预测

The Practice of Decreasing Si in Hot Metal in No.2 Blast Furnace of No.2 Ironmaking plant of Laiwu Iron and Steel General Works

莱钢二铁2~高炉生铁降硅实践

It is proved by controllable metal experimental instrument: thermoelectric potential field exists in cooling hot metal of cast iron, which is point electrical potential field, and its life is approximately 0 05 ￣ 3 58s.

用金属型可控实验仪证实：进行冷却的铸造铁水内部存在着温差电势场，且为点电势场，其寿命约为0.05～3.58s。

Review of Development of Injection Lance Technology for Hot Metal Desulphurization

铁水脱硫喷枪技术的发展综述

The hot metal pretreatment process at Baosteel is briefly introduced.

前言：对宝钢铁水“三脱”工艺的处理效果进行了简介。

A method combining temporal difference method with neural network model is applied to predict the sulfur content of the hot metal.

将时差方法与人工神经元网络方法有机地结合起来，提出了一种在高炉铁水含硫量预报中的应用策略。

They poured the hot metal into the mould.

他们把熔化了的金属倒进模子里.